Features

• 4KG flywheel
• Commercial use
• Belt Driven
• Magnetic resistance system
• Heavy-duty flywheel
• Non-slip, multi-position handlebar
• Pull resistant way for emergency brake
• Anti-perspiration cover prevents sweat from dropping on cast wheel, to extend operating life.
• Driving System: Belt
• Brake System: Magnetic Brake
• Handle and seat adjustment: 250mm
• Wheel Material: Aluminium
• Console (Optional): Time, Speed, Distance, Calories and Heart rate
• Console is powered by CR 2032 battery
• Power Requirements: Self Powered, Cordless. It uses an Alternator and Battery for Power
• California Residents see Prop 65 WARNINGS

Optional Console Specifications:

• Time (TIMER)
  Measure the time from when a movement starts to when it stops. When a signal comes in, start timing. When there is no speed signal input within 4 seconds, the time is paused and a "P" symbol is displayed. Setting range: 00:00~99:00 minutes, each time the UP key is pressed, the time and minutes will increase by 1; Set the exercise time, and there will be 12 continuous beeps of "BI-BI-BI-BI" when the predetermined time is reached.
• Speed (SPEED)
  Measure instantaneous speed, measuring range 0.0 ~ 99.9. If it is out of range, it will display 99, 9 If there is no signal input within 4 seconds, the speed is displayed as 0.0.
• Speed (RPM) (with or without binding)
  Measure instantaneous speed, measuring range 0 ~ 999. If it is out of range, 999 will be displayed. If there is no signal input within 4 seconds, the speed will be displayed as 0. SPEED and RPM toggle every 5 seconds.
• Distance/Distance (DIST)
  Measure the distance traveled from the start of the movement to the time the movement stops. Measuring range: 0.0 ~99.99; Setting range: 0.00~99.50, each time you press the UP key, the distance will increase by 0.5; each time you press the DOWN key, the distance will decrease by 0.5, and long press to quickly accumulate or decrease. Set the movement distance, there will be a continuous "BI-BI-BI-BI" prompt when the predetermined distance is reached,
• Calories per Calories (CAL)
  Measure the calories burned (ie, calories) from when you start exercising until you stop exercising. Measuring range: 0 cards ~ 9990 cards. Each time you press the UP button, the calories will increase by 10; each time you press the DOWN button, the calories will decrease by 10; long press to quickly add or subtract. Set the calories consumed by exercise, and there will be a continuous "BI-BI-BI-BI" prompt when the energy consumption is scheduled.
• Heart rate (PULSE)
  By holding a heart rate sensor in hand, the number of heartbeats per minute of a person is measured. Your current heart rate will be displayed 1~2 seconds after receiving the heartbeat signal. When a heartbeat signal is received during measurement, the heartbeat symbol flashes. When there is no heart rate signal input, the heart rate is displayed as 0. Setting range: 0~40~240 times/min. Each time the UP button is pressed, the heart rate increases by 1; each time the DOWN button is pressed, the heart rate decreases by 1; long press to quickly accumulate or decrease. Set the measurement range of heart rate. When the measurement exceeds the preset range, the corresponding character flashes to prompt. Set the heart rate for 10 seconds without continuing to move and return to normal mode. NOTE: When two heart rate boards are connected at the same time, heart rate data will be displayed on either board with heart rate input. If there is heart rate input at the same time, the board with the heart rate first will display data first.
• Standby
  When there is no signal input for 4 seconds, the time pauses and enters standby mode.
• Sleep
  4 minutes without signal input, IC enters SLEEP mode, LCD displays year, month, day, current time and ambient temperature
• Wake up
  When there is a distance signal, a mode switching signal, a setting signal, and a reset signal input, the system starts to work and maintains the pre-sleep mode. When the secondary distance signal and mode switching signal are only used for wake-up, they are not used for speed or mode switching.
• Set the MODE key, each time the set key is pressed, it switches to the next setting mode [TIMER→DIST→CAL→(PULSE)(SPEED)], short press the UP or DOWN key to adjust the digital plus or minus, long press to enter the quick Add or subtract. Press and hold the MODE key for 2 seconds to clear all data and automatically switch to SCAN+ TIMER mode.
• Reset key RESET
  In the setting state, clear the current data or reset to the default data.

Tech Specs

• Wheel Weight: 7.7lb (3.5kg)
• Weight: 116.8lb (53kg)
• Dimensions: 55.1"L x 22"W x 51.1"H (L:1400mm, W:560mm, H:1300mm)
• Shipping Weight: 127.8lb (58kg)
• Shipping Dimensions: 52.3L" x 10.6W" x 33.4H" (L:1330mm, W:270mm, H:850mm)

Warranty

Images